Welcome to our websites!

Deep hole drilling machine special for petroleum drill coller ZSK21 series

Short Description:

ZSK2110B CNC deep-hole drilling machine adopt BTA chip removal to drill small diameter deep-hole workpieces, is very suitable for petroleum drill collar workpiece. The biggest characteristic of this machine is that: the front end of workpiece which near to the oil pressure head is clamped by double chucks and the rear end is clamped by annular steady rest.


Product Detail

Product Tags

Introduction

ZSK2110B CNC deep-hole drilling machine adopt BTA chip removal to drill small diameter deep-hole workpieces, is very suitable for petroleum drill collar workpiece. The biggest characteristic of this machine is that: the front end of workpiece which near to the oil pressure head is clamped by double chucks and the rear end is clamped by annular steady rest. The top locking of workpiece and the fixation of oil pressure head are controlled by hydraulic system, safe and practical. The machine is mated with travel head with rotating drilling rod to suit different requirement.Special deep hole drilling machine for petroleum drill collar TS21 series

Deep hole drilling machine special for petroleum drill coller ZSK21 series (2)

Main technical parameter

    ZS2110B TS21

Working capacity

Range of drilling Dia. Φ30-Φ100mm
Max. drilling depth 6-20m
Workpiece clamped Dia. range Φ60-Φ300mm
 

Spindle

Center height from spindle center to bed 600mm 350mm
Range of spindle speed 18-290rpm, 9 gears 42-670rpm, 12 gears

 

Travel head with rotating drilling bar

Spindle bore Dia. of travel head with rotating drilling bar Φ120mm Φ100mm
Taper of spindle bore (travel head with rotating drilling bar) Φ140mm, 1:20 Φ140mm, 1:20
Range of spindle speed (travel head with rotating drilling bar) 25-410rpm, 12 kinds 82-490rpm, 6 kinds

Feed

Feed speed range (infinite) 0.5-450mm/min
Rapid travel speed of carriage 2m/min

 

 

Motors

Main motor power 45KW 30KW
Motor power of travel head with rotating drilling bar 45KW 30KW
Motor power of hydraulic pump 1.5KW, n=144rpm.
Rapid travel motor power of carriage 5.5KW 4KW
Feed motor power 7.5KW (servo motor)
Motor power of cooling pump 5.5KW x 4 groups

 

 

others

Guide way width 1000mm 650mm
Rated pressure of cooling system 2.5MPa
Flow of cooling system 100,200,300,400L/min
Rated working pressure for hydraulic system 6.3MPa

Optional annular steady rest

Φ60-330mm (for ZS2110B)
Φ60-260mm (for TS2120)
Φ60-320mm (for TS2135)

  • Previous:
  • Next:

  • Write your message here and send it to us