Deep Hole Machining Machine
-
TSK21200 CNC Heavy Type Deep Hole Drilling And Boring Machine
The machine is a deep hole processing machine, which can complete the drilling, boring and trepanning of deep holes of heavy parts with large diameter. Suitable for maximum drilling diameter Φ 210mm, maximum trepanning diameter Φ 500mm, maximum boring diameter Φ2000mm workpiece with length not more than 25m.
-
Deep Hole Pull Boring Machine TLS2210A/TLS2220B
The machine is a specially used for boring long and thin pipes. It adopts the processing mode of workpiece rotation (passing through the spindle hole of headstock) and cutting tool bar is fixed and only for feed motion. When boring, the cutting fluid is supplied by the oil pressure head, and the cutting chips are discharged forward. The cutting tool feed adopts AC servo drive system to realize stepless speed regulation. Headstock adopts multi-stage gear speed change, with a wide speed range. Mechanical locking device is used for clamping of the oil pressure head and workpiece.
-
ZK2302/ZK2303 Series 3D CNC Deep Hole Drilling Machine
This machine is a deep hole processing equipment for drilling holes with 3D workpiece. It is a high-efficiency, high-precision and high-automatic machine tool for drilling small holes with external chip removal method (gun drilling method). Through one continuous drilling, the processing quality that can be guaranteed by the general drilling, expanding and reaming procedures can be achieved. The hole diameter accuracy can reach IT7-IT10, the surface roughness can reach Ra3.2-0.04μm, and the straightness of the hole center line is ≤0.05mm/100mm.
All our products have to go through three separate checks throughout the whole manufacturing process: materal, every part for assembly and accuracy inspection or finished products, We control quality from raw materials, we always select the best quality raw materials, and we have an quality inspector for each process, quality is always our top concerned.
-
ZK2303A Series CNC Tube-Plate Drilling Machine
The machine tool is a special CNC deep hole drilling machine for processing tube sheet workpieces. Controlled by CNC system, it can be used to process workpieces with coordinate hole distribution. The X-axis drives the cutting tool and column system to move laterally, and the Y-axis drives the cutting tool system to move up and down to complete the positioning of workpiece. The Z-axis drives the rotating tool system to move longitudinally to complete deep hole drilling.
-
Deep Hole Drilling And Boring Machine T2150/T2250 Series
T2150 deep hole drilling and boring machine is the heavy machine tool. The workpiece is positioned by a taper plate while boring, and that is clamped by a three-jaw chuck during drilling. The oil pressure head adopts the spindle structure, which greatly improves the bearing performance and the rotation accuracy. The guide way adopts a high rigid structure suitable for deep hole machining, with large bearing capacity and good guiding accuracy; The guide way is quenched and has high wear resistance. The machine tool has the functions of drilling, boring, rolling and trepanning. Suitable for machining the center hole of shaft parts. PLC control system and touch screen are adopted for simple operation; The above ground oil tank is adopted for the cooling system.
-
Hones, Deep Hole Honing Machine Jhc Series With Steel Plate Welded Bed
This deep hole powerful honing machine is equipped with PLC controller or CNC system (optional), linear rolling guide way, AC servo motor, grinding rod adopts stepless speed regulation, stable commutation, convenient speed regulation, easy to ensure the accuracy of hole size, and reduce labor intensity. In the honing process, the sand rod and the workpiece always maintain constant pressure, so that the sand rod can be strongly ground. It ensures the high efficiency of deep hole machining, and is suitable for rough and fine honing of general cylindrical deep hole parts. This type of machine tool can also be used for partial honing to correct the taper and ellipticity of parts and the partial hole error.
-
TMK2280 Deep Hole Cylinder Boring And Honing Compound Machine
The machine is a kind of high efficiency, high precision, high automation deep hole boring and honing compound equipment. It is used for boring and honing cylindrical workpiece.
In the process of machining, the workpiece rotates and the cutting tool does not rotate.
The cutting oil for boring and honing is different. The machine tool is equipped with two sets of oil supply system and oil tank. When the two processing methods are converted, they need to be switched to their respective oil circuits.
Boring and honing share the same cutting tool tube.
-
Heavy Duty Deep Hole SRB Machine TGK50/TGK63 Series
TGK50/TGK63 series heavy duty boring, skiving and roller burnishing machine adopts the processing way of the workpiece rotating and the tool feeding. It can also used the way of workpiece is fixed and cutting tools rotate and feeds. The machine can perform skiving and roller burnishing of inner hole, the machining technology is simple (once time processing is finished and formed). It has high efficiency and stable performance. The productivity is 5-10 times of the traditional deep hole boring machine. The high intelligent level and the easy operation of the digital control make the machine in a stable running.
-
Deep Hole SRB Machine TGK Series
TGK CNC boring, skiving and roller burnishing machine has the smart and simple CNC operation system with high efficiency and stable performance, using environmental protection measures against oil splash and leakage.
-
Deep hole drilling machine special for petroleum drill coller ZSK21 series
ZSK2110B CNC deep-hole drilling machine adopt BTA chip removal to drill small diameter deep-hole workpieces, is very suitable for petroleum drill collar workpiece. The biggest characteristic of this machine is that: the front end of workpiece which near to the oil pressure head is clamped by double chucks and the rear end is clamped by annular steady rest.
-
Deep hole drilling and boring machine, BTA drilling machine T2150/T2250 series
T2150 deep hole drilling and boring machine is the heavy machine tool. The workpiece is positioned by a taper plate while boring, and that is clamped by a three-jaw chuck during drilling. The oil pressure head adopts the spindle structure, which greatly improves the bearing performance and the rotation accuracy. The guide way adopts a high rigid structure suitable for deep hole machining, with large bearing capacity and good guiding accuracy; The guide way is quenched and has high wear resistance.
-
Deep Hole Drilling And Boring Machine T2163
T2163 is special equipment for machining deep cylindrical hole of workpieces. It can be perfectly suited for drilling, boring and trepanning through holes, blind and step hole in workpiece: such as, spindle of various kinds of machines, many kinds of hydraulic cylinders and cylinders. It can perform not only drilling and boring, but also rolling and trepanning. The method of the internal-removal (BTA) chip is adopted in drilling, and external metal chips removal is used for boring and trepanning.